Removing Brass Finish From Bathroom Fixtures

Removing Brass Finish From Bathroom Fixtures

I've stripped a brass ceiling fan down to the silver metal underneath using a drill with a wire brush attachment. The easier thing to do would be to just use Epoxy appliance paint in stainless steel though, it is water resistant & very durable.

Seems like it would be an 'iffy' outcome since I believe chrome is a surface finish itself. I would do a lot of research before trying to strip brass. I am thinking it would be just bare metal underneath if it's not solid brass. Have you considered Rustoleum paint to cover the existing finish? I'm sure you'll get some professional advice from this site. Good luck. Oh - Just FYI - Gold and brass are the latest trend for 2015!! :)

..You CAN spray paint right over that finish, without removing it. You will need to scuff it up a little, clean it, and then you can paint. I have painted bath hardware, and I suggest you check out this post, http://simpledetailsblog.blogspot.com/2013/03/painted-faucets-shower-enclosure.html. It has details on the ' how -to'....and if your shower enclosure can be taken off , and done outdoors or in a garage....all the better. :)

Norma on Feb 25, 2015

How's the durability on that?

D & K on Feb 26, 2015

I have heard you can chemically strip brass plating using acid although I'm not certain which acid but I wonder what the look of the metal underneath would be. Being the metal was intended to be plated there maybe defects unforeseen until the plating is removed. Personally I would lightly sand the plated areas and use a hammered looking paint. I have used Rustoleum hammer look paint on several old exterior light fixtures in an effort to match the existing antique units where replacements were impossible to find. They came out very nice and matched the originals very well. Just a thought Oh, if you do go that route, stay away from the faux chrome spray paints, They dull very easily and clear coating them simply expedites the process.

Shiny brass is making a comeback according to some décor sources. Have only recently been able to get brass taps for one of my half baths.

If you like the appearance of the spot left by the mildew cleaner, why not just wipe the whole thing with it - sounds like it did an exceptional job removing the brass plate with no scrubbing/sanding. If you don't like the appearance after doing it, then you could get some chrome paint (or get creative) and paint it, because it won't be chrome underneath.

SJazz on Feb 27, 2015

I've read posts where people applied oven cleaner to give it a dull silver look. Much better than the brass

• Yeah I just saw a post on Pinterest suggesting the same. I have an old floor lamp that is brass, and I think I may try the oven cleaner idea first. I hope it works. It would definitely safe me some money.

My solution was painstaking, but it was worth all the prep time. First, I covered all the tile, flooring and glass doors with newspapers (taping them together). I used blue painter's tape around the areas I wanted changed out from bright shiny brass to a satin finish. I sanded the brass down a bit, then used Rust-O-Ium spray paint (Satin silver). I even did this for the controls for the shower. After 6 years, it still looks great.

Dee on Oct 14, 2016

Another solution would be is to find a brass spray paint and fix the spot. Yes you can use Rustoleum spray paint, but it is very messy even with preparation. If you choose to do that make sure the room is well ventilated.

Chrome is the last layer plated so you cannot strip brass and have a chrome finish. Most showers are not chromed and can have a thin anodized finish appearing brass. You might be able to strip the anodized surface but getting it to look like anything shiny like chrome won't happen. There are some auto accessory tapes that are pretty waterproof that you might be able to tone down the brass glow with a color that might compliment your bathroom.

Removing Brass Finish From Bathroom Fixtures

Source: https://www.hometalk.com/7337472/q-can-you-strip-bright-shiny-brass-to-chrome

Share: